BS EN 13121-1-2003 地面用玻璃钢槽罐和容器.原材料.技术条件和验收条件

作者:标准资料网 时间:2024-05-23 14:05:20   浏览:8361   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:GRPtanksandvesselsforuseaboveground.Rawmaterials.Specificationconditionsandacceptanceconditions
【原文标准名称】:地面用玻璃钢槽罐和容器.原材料.技术条件和验收条件
【标准号】:BSEN13121-1-2003
【标准状态】:现行
【国别】:英国
【发布日期】:2003-05-30
【实施或试行日期】:2003-05-30
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:验收;验收规范;验收试验;添加剂;容器;定义(术语);流体;气体;玻璃纤维增强塑料;液体;材料;高架的;母质;塑料容器;聚酯树脂;特性;质量保证;质量控制;反应剂;反应性树脂模塑材料;反应性树脂;推荐应用;增强材料;树脂;规范(验收);储存;液罐集装箱;槽罐设备;水箱(容器);热塑性聚合物;不饱和聚酯树脂;蒸气;乙烯酯;乙烯基树脂
【英文主题词】:Acceptance;Acceptancespecification;Acceptancetests;Additives;Containers;Definitions;Fluids;Gases;Glass-fibrereinforcedplastics;Liquids;Materials;Overhead;Parentmaterials;Plasticcontainers;Polyesterresins;Properties;Qualityassurance;Qualitycontrol;Reactants;Reactionresinmouldingmaterials;Reactionresins;Recommendedapplication;Reinforcingmaterial;Resins;Specification(approval);Storage;Tankcontainers;Tankinstallations;Tanks(containers);Thermoplasticpolymers;Unsaturatedpolyesterresins;Vapours;Vinylesters;Vinylresins
【摘要】:ThisEuropeanStandardgivesrequirementsforspecificationandacceptanceconditionsofrawmaterialsforGRPtanksandvesselswithorwithoutliningforstorageorprocessingoffluids,factorymadeorsitebuilt,nonpressur-isedorpressurised,foruseaboveground.
【中国标准分类号】:A82
【国际标准分类号】:23_020_10
【页数】:24P;A4
【正文语种】:英语


下载地址: 点击此处下载
Product Code:SAE J276
Title:Steering Frame Lock for Articulated Loaders and Tractors
Issuing Committee:Optc1, Personnel Protection (General)
Scope:This SAE Standard is applicable to articulated frame loaders and tractors as defined by SAE J/ISO 6165, and rollers and compactors as defined by SAE J1017, when equipped with steering, frame locking device. The scope is limited to machines where hazards exist due to maintenance operations.PurposeThis document provides the performance requirements for a steering, frame locking device which when used will prevent unintended articulation of the machine either during shipment or maintenance operations. In addition, it provides mounting position, storage on the machine and identification requirements.
基本信息
标准名称:印制电路板设计规范
中标分类: 航空、航天 >> 航空器与航天器零部件 >> 电子元器件
替代情况:被QJ 3103-1999代替
发布日期:1988-04-25
实施日期:1986-12-01
首发日期:
作废日期:1999-10-30
出版日期:
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 航空 航天 航空器与航天器零部件 电子元器件