ASTM D7563-2010 评估机油对水和模拟Ed85燃料的乳化能力的标准试验方法

作者:标准资料网 时间:2024-05-13 15:51:40   浏览:8996   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:StandardTestMethodforEvaluationoftheAbilityofEngineOiltoEmulsifyWaterandSimulatedEd85Fuel
【原文标准名称】:评估机油对水和模拟Ed85燃料的乳化能力的标准试验方法
【标准号】:ASTMD7563-2010
【标准状态】:现行
【国别】:美国
【发布日期】:2010
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:D02.B0.07
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:
【英文主题词】:denaturedfuelethanol;engineoil;engineoilemulsion;simulatedEd85fuel;wateremulsion;Denaturedfuelethanol;Emulsification;Engineoils(automotive)
【摘要】:Duringengineoperation,engineoilcanbecomecontaminatedbywaterandfuel.InthecaseofEd85fuels,thiscontaminationcanresultinanon-emulsifiedaqueousbottomlayerintheoilthatcanaffectthelubricationanddetergencyoftheengineoil.Toavoidfieldproblems,engineoilshouldbecapableofemulsifyingwatercontaminationtotheextentthatnoaqueouslayerappears.Thetestdescribedinthismethodisdesignedtoevaluatetheabilityofanengineoil,contaminatedwithaspecifiedamountofwater(volumefractionof10%oftheoriginaloilsample)andsimulatedEd85fuel(alsoavolumefractionof10%oftheoriginaloilsample),toemulsifythewaterafteragitationinablenderandtomaintainthisemulsionattemperaturesof20x00B0;Cto25x00B0;Cand-5x00B0;Cto0x00B0;Cforatleast24h.Thistestmethodhaspotentialuseinspecificationsofenginelubricatingoils,suchasSpecificationD4485.1.1ThistestmethoddescribesaqualitativeproceduretomeasuretheabilityofaspecificvolumeofengineoiltoemulsifyaspecificaddedvolumeofcombinedwaterandsimulatedEd85fueluponagitationinahigh-speedblenderandtoretainthisemulsifiedstateforatleast24hattemperaturesofboth20x00B0;Cto25x00B0;Cand-5x00B0;Cto0x00B0;C.1.2InformationLettersarepublishedperiodicallybytheASTMTestMonitoringCenter(TMC)toupdatethisandothertestmethodsunderthejurisdictionofSubcommitteeD02.B0.CopiesoftheseletterscanbeobtainedbywritingtheCenter.1.3ThevaluesstatedinSIunitsaretoberegardedasstandard.Nootherunitsofmeasurementareincludedinthisstandard.1.4Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:E34
【国际标准分类号】:75_100
【页数】:6P.;A4
【正文语种】:英语


下载地址: 点击此处下载
【英文标准名称】:StandardPracticeforDirectContactCellCultureEvaluationofMaterialsforMedicalDevices
【原文标准名称】:直接接触细胞培养评估医疗器械材料的标准实施规程
【标准号】:ASTMF813-2007
【标准状态】:现行
【国别】:美国
【发布日期】:2007-01-01
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:细胞;评定;材料;医疗设备;医学科学;微生物学
【英文主题词】:Cells;Evaluations;Materials;Medicalequipment;Medicalsciences;Microbiology
【摘要】:
【中国标准分类号】:C30
【国际标准分类号】:07_100_10
【页数】:4P;A4
【正文语种】:英语


基本信息
标准名称:搓丝板
英文名称:Thread rolling flat dies
中标分类: 机械 >> 工艺装备 >> 刀具
ICS分类:
替代情况:替代GB/T 972-1994
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-06-03
实施日期:2009-01-01
首发日期:1967-03-04
作废日期:
主管部门:中国机械工业联合会
提出单位:中国机械工业联合会
归口单位:全国刀具标准化技术委员会(SAC/TC 91)
起草单位:成都工具研究所
起草人:邓智光、聂珂星
出版社:中国标准出版社
出版日期:2008-09-01
页数:9页
计划单号:20063869-T-604
书号:155066·1-32729
适用范围

本标准规定了普通螺纹用搓丝板的型式尺寸、牙型尺寸及偏差、技术要求、标志和包装等的基本要求。
本标准适用于加工普通螺纹(GB/T192~193, GB/T196~197)的搓丝板。
搓丝板分为三种精度等级:1级、2级和3级。1级适用于加工公差等级为4级、5级的外螺纹;2级适用于加工公差等级为5级、6级的外螺纹;3级适用于加工公差等级为6级、7级的外螺纹。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T192 普通螺纹 基本牙型(GB/T192-2003,ISO681:1998,MOD)
GB/T193 普通螺纹 直径与螺距系列(GB/T193-2003,ISO261:1998,MOD)
GB/T196 普通螺纹 基本尺寸(GB/T196-2003,ISO724:1993,MOD)
GB/T197 普通螺纹 公差(GB/T197-2003,ISO9651:1998,MOD)

所属分类: 机械 工艺装备 刀具